All Activities
Restore an old bike

Restore an old bike
Green highlight

Restore an old bike by cleaning parts, tightening bolts, inflating tires, lubricating the chain, and repainting safely with adult supervision to learn practical repair skills.

Orange shooting star
Start Creating
Background blob
Challenge Image
Table of contents

Step-by-step guide to restore an old bike

0:00/0:00

Here at SafeTube, we're on a mission to create a safer and more delightful internet. 😊

Young Girl Restores an Abandoned Motorcycle Back to Life - Incredible Full Restoration Journey!

What you need
Adjustable wrench or bike multi-tool, adult supervision required, bicycle lubricant, bucket of warm soapy water, clean rags, gloves, masking tape and newspaper, old bike, primer and spray paint or brush-on bike paint, safety glasses, sandpaper medium grit, sponge or soft brush and old toothbrush, tire pump with pressure gauge

Step 1

Ask an adult to supervise the whole project.

Step 2

Put on your gloves and safety glasses.

Step 3

Move the bike to a well-ventilated outdoor area and set it on a stable surface.

Step 4

Look over the bike and list loose bolts flat tires rusty spots and other problems to fix.

Step 5

Remove small accessories like baskets lights or bells and set them aside.

Step 6

Wash the frame wheels and visible parts with soapy water and a sponge or soft brush.

Step 7

Rinse the bike with clean water and dry all surfaces with a rag.

Step 8

Scrub the chain and gears with an old toothbrush or brush to remove grime.

Step 9

Wipe the chain and gears dry with a clean rag.

Step 10

Use an adjustable wrench or bike multi-tool to tighten loose bolts and nuts.

Step 11

Inflate the tires with a pump to the pressure printed on the tire sidewall.

Step 12

Put a small amount of bicycle lubricant on the chain and pedal backward to help spread it.

Step 13

Sand rusty or peeling paint areas until smooth and wipe away the dust.

Step 14

Tape off parts you do not want painted cover the ground with newspaper and, with your adult, apply primer and thin coats of paint letting each coat dry as instructed.

Step 15

Reattach any removed parts check brakes wheels and gears then take a short test ride with your adult and share your finished creation on DIY.org.

Final steps

You're almost there! Complete all the steps, bring your creation to life, post it, and conquer the challenge!

Complete & Share
Challenge badge placeholder

Help!?

What can we use if we don't have bicycle lubricant or a bike multi-tool?

If you don't have bicycle lubricant, apply a few drops of light sewing-machine or 3-in-1 oil to the chain with adult permission, and if you don't have a bike multi-tool use an adjustable wrench or crescent wrench to tighten bolts as instructed in the 'tighten loose bolts' step.

The tire won't hold air after I inflate it—what should we check and do next?

After following the 'inflate the tires' step, check the tube and rim for punctures or pinched edges, use soapy water to spot bubbles, and repair with a patch kit or replace the tube with an adult's help if you find a leak.

How can we adapt the tasks for younger kids versus older kids?

Have younger children do supervised jobs like washing the frame, listing loose bolts and flat tires, removing accessories, and drying parts, while older kids can safely handle sanding rusty spots, using the adjustable wrench, and applying primer and paint as described.

What are simple ways to personalize or enhance the restored bike once it's working?

Personalize and enhance the bike by taping off custom shapes before painting, adding decals, new grips, a bell or basket when you 'reattach any removed parts,' and then show your finished creation on DIY.org as the instructions suggest.

Watch videos on how to restore an old bike

0:00/0:00

Here at SafeTube, we're on a mission to create a safer and more delightful internet. 😊

DIY Bike Restoration | Girl Transforms a Rusty Forest Find into a Working Machine

3 Videos

Facts about bicycle maintenance and repair for kids

🔧 Proper tire pressure reduces rolling resistance and helps prevent pinch flats and punctures — check PSI before every ride!

🛠️ Regularly cleaning and lubricating a bike chain can dramatically reduce wear and make pedaling much smoother.

🎨 Sanding, priming, and repainting a clean frame helps paint last for years — always use goggles, masks, and adult supervision with spray paint.

🕰️ The earliest two-wheeled precursor to the modern bicycle, the draisine, was invented in 1817 by Karl Drais.

🚲 There are more bicycles than cars worldwide — estimates put the global bike count at over one billion.

How do you restore an old bike step by step?

Start by inspecting the bike for rust, loose bolts, or worn parts while wearing gloves and safety glasses. Clean frames and components with soapy water or a degreaser, then dry thoroughly. Tighten bolts and adjust brakes and gears using the correct wrenches or Allen keys. Inflate tires to the recommended pressure and fix flats. Lubricate the chain sparingly, then, with adult supervision, prep and repaint: sand, prime, mask areas, apply thin coats, and let cure before testing.

What materials and tools do I need to restore an old bike?

You’ll need basic tools and safety gear: gloves, safety glasses, rags, brushes, bucket, mild soap or bike degreaser, and a toothbrush for small parts. Add a bike repair stand (optional), adjustable wrench or socket set, Allen keys, tire pump, patch kit or spare tubes, chain lubricant, and sandpaper. For repainting, get primer, spray paint designed for metal, masking tape, and a drop cloth. Replace severely worn parts like brake pads or cables as needed.

What ages is restoring an old bike suitable for?

This activity suits different ages with supervision: ages 5–8 can help wash the bike and hand tools under close adult guidance; ages 9–12 can learn to inflate tires, tighten simple bolts, and help lubricate the chain with instruction; ages 13+ can take on more complex tasks like adjusting brakes, replacing parts, and repainting with adult oversight. Always supervise when using sharp tools, pumps, chemicals, or spray paint, and assign tasks based on the child’s skill and confidence.

What are the benefits of restoring an old bike and what safety tips should we follow?

Restoring a bike builds practical skills, problem solving, fine motor control, and confidence while teaching maintenance and responsibility. It’s a low-cost way to recycle and customize a bike. Safety tips: always wear gloves and eye protection, work in a well-ventilated area for degreasers and paint, keep a first-aid kit nearby, and lock the bike on a stand when tightening parts. Replace badly worn components and inspect the bike before each test ride.
DIY Yeti Character
Join Frame
Flying Text Box

One subscription, many ways to play and learn.

Try for free

Only $6.99 after trial. No credit card required

To create a safe space for kid creators worldwide!

Discovery Tools

DIY Wiki

DIY TV

Creativity Tools

How to draw

Teacher Tools

SafeTube

DIY Blog

2025, URSOR LIMITED. All rights reserved. DIY is in no way affiliated with Minecraft™, Mojang, Microsoft, Roblox™ or YouTube. LEGO® is a trademark of the LEGO® Group which does not sponsor, endorse or authorize this website or event. Made with love in San Francisco.

Restore an old bike. Activities for Kids.