Show Us Your DIY Witch Costume
Make a safe DIY witch costume using cardboard, felt, glue, and fabric scraps; create a hat, cape, and harmless broom prop to wear and display.

About this activity
Make a safe DIY witch costume using cardboard, felt, glue, and fabric scraps; create a hat, cape, and harmless broom prop to wear and display.
What you need
Step by step
- 1
Step 1
Clear a table and lay out all your materials so they are easy to reach.
- 2
Step 2
Cut a large semicircle from cardboard to make the hat cone.
- 3
Step 3
Roll the semicircle into a cone shape and secure the seam with tape.
- 4
Step 4
Cut a large circle from cardboard to make the hat brim.
- 5
Step 5
Cut a smaller circle from the center of the brim so the cone base will fit through.
- 6
Step 6
Tape the brim to the cone around the base to join them into a hat.
- 7
Step 7
Glue a sheet of felt over the outside of the hat to cover the cardboard.
- 8
Step 8
Decorate the hat by gluing fabric scraps or drawing fun designs with markers.
- 9
Step 9
Cut a cape shape from a large piece of fabric to your desired length.
- 10
Step 10
Attach a ribbon or elastic to the top corners of the cape so it ties around the neck.
- 11
Step 11
Roll a long strip of cardboard tightly to form a broom handle and tape it closed.
- 12
Step 12
Gather several fabric scraps around one end of the handle and tie them with ribbon to make harmless broom bristles.
- 13
Step 13
Put on your witch hat and cape and hold your broom to check how everything fits and looks.
- 14
Step 14
Share your finished witch costume on DIY.org
Fun facts
How do I make a safe DIY witch costume (hat, cape, broom) step-by-step?
Start by making a cone hat from lightweight cardboard: form a cone, trim for fit, then cover with felt and glue or hand-stitch the seam. Add an elastic chin strap or ribbon. For the cape, measure from shoulders to desired length, cut fabric scraps into a semicircle, hem or glue edges, and attach a Velcro or ribbon tie. Make a harmless broom by bundling fabric strips or yarn around a soft cardboard tube and securing with tape or twine. Test fit and trim any long edges to avoid tripping hazards.
What materials do I need to make a DIY witch costume using cardboard, felt, glue, and fabric scraps?
Gather lightweight cardboard (for the hat and broom handle), felt to cover the hat and add decorations, assorted fabric scraps for the cape and broom tassels, child-safe glue or craft glue, scissors (child-safe), elastic or ribbon for hat ties, Velcro or ribbon for cape closure, yarn or twine to bind the broom, markers and embellishments like buttons or sequins, and tape. Optional: needle and thread or a hot-glue gun used by an adult for firmer joins.
What ages is this DIY witch costume suitable for?
This activity suits a wide range: preschoolers (3–5) can decorate pre-cut pieces and help glue with close adult supervision; school-age kids (6–9) can cut felt, assemble simple seams, and customize details; older children (10–12+) can design patterns, use basic hand-sewing, and take more responsibility for construction. Always supervise use of scissors, hot glue, and any small decorations to prevent injuries or choking hazards.
How can I keep the DIY witch costume safe and comfortable for kids?
Choose soft, breathable fabrics and avoid long trailing hems that could catch or trip. Secure closures with Velcro or elastic rather than pins. Keep decorations flat and firmly glued to prevent choking hazards. Use flame-resistant or natural fibers and avoid open flames during wear. Test mobility and visibility before going out, add reflective tape for evening use, and have adults handle hot glue or sharp tools to ensure a safe, fun costume.
Watch & Learn
Need help?
What can we use if we can't find felt or sturdy cardboard for the hat and brim?
If you don't have felt for 'Glue a sheet of felt over the outside of the hat' or thick cardboard for the semicircle and brim cuts, substitute construction paper, poster board, an old cereal box for cardboard, or fabric from an old T-shirt to wrap and glue over the cone and brim.
The cone won't stay closed or the brim hole is too big—how do we fix that?
If the cone seam from 'Roll the semicircle into a cone shape and secure the seam with tape' keeps opening, reinforce it with extra tape or a line of glue inside, and if the brim hole is too big, trim the circle smaller and retest until the cone base fits snugly before taping the brim to the cone.
How can we adapt this project for younger or older kids?
For younger children, have an adult pre-cut the semicircle, brim, and cape and let them glue fabric scraps and tie ribbon (steps: cutting shapes, gluing, attaching ribbon), while older kids can measure and cut their own cardboard, stitch the cape's edges, and add painted or sewn decorations for extra detail.
What are some ways to personalize or upgrade the witch costume after finishing it?
To enhance the costume, add battery LED lights inside the hat's felt when you 'Decorate the hat,' insert thin wire around the 'Cut a large circle from cardboard to make the hat brim' edge to shape it, and swap the fabric-scrap broom bristles for colorful yarn tassels tied to the rolled cardboard handle for a sturdier look.