Make a paper maché model
Make a paper mache model by layering torn newspaper and glue over a balloon or cardboard form; paint and decorate your hardened sculpture afterward.

About this activity
Make a paper mache model by layering torn newspaper and glue over a balloon or cardboard form; paint and decorate your hardened sculpture afterward.
What you need
Step by step
- 1
Step 1
Lay the plastic sheet or towel on your work surface and put all materials within reach.
- 2
Step 2
Choose and set up your form by inflating a balloon to the size you want or building a cardboard shape and securing it with masking tape.
- 3
Step 3
Mix one part white glue with one part water in a bowl and stir until smooth or make a flour paste by mixing flour and water until smooth.
- 4
Step 4
Tear newspaper into strips about 1 to 2 inches wide.
- 5
Step 5
Dip one strip into the paste and slide it between your fingers to remove excess paste.
- 6
Step 6
Place the strip onto the form and smooth it flat with your fingers.
- 7
Step 7
Continue adding overlapping strips until the form has three to four solid layers.
- 8
Step 8
Let the paper mache dry completely for 12 to 24 hours until hard.
- 9
Step 9
If you used a balloon pop it and pull it out or if you used cardboard carefully open seams to remove the hardened shell.
- 10
Step 10
Trim any rough edges with scissors to make the shape neat.
- 11
Step 11
Paint a base coat on your sculpture using your paint and a brush.
- 12
Step 12
Let the paint dry completely before adding more details.
- 13
Step 13
Add decorations like painted details stickers or glitter to finish your sculpture.
- 14
Step 14
Share your finished creation on DIY.org
Fun facts
How do you make a paper maché model by layering torn newspaper and glue over a balloon or cardboard form?
Start by choosing a form: inflate a balloon or build a cardboard armature. Mix paste (equal parts flour and water whisked smooth, or watered-down PVA glue). Tear newspaper into strips. Dip strips into paste, remove excess, and smooth them over the form in overlapping layers. Allow each 2–3 layers to dry before adding more. Once rigid, pop the balloon or remove the form, sand edges, then paint and decorate your sculpture.
What materials do I need to make a paper maché model?
You’ll need torn newspaper or scrap paper, a balloon or cardboard core, paste (flour and water mix or PVA glue diluted with water), a bowl and spoon, scissors and tape, paint and brushes, and a sealing varnish or acrylic sealer. Also use protective coverings for your work surface, an apron, and a drying rack or safe spot to let the sculpture harden. Optional: craft accessories for decoration like glitter or fabric.
What ages is making a paper maché model suitable for?
Paper maché is great for many ages: preschoolers (4–6) can tear paper and layer strips with help; school-age kids (7–12) can manage paste, layering, and basic shaping with supervision; teens can build more complex armatures and finish details. Adult supervision is recommended for mixing paste, using scissors, removing balloons, and painting. Adapt the complexity of the form and number of layers to the child’s skill level.
What safety tips should I follow when making a paper maché model?
Work in a well-ventilated area and cover surfaces to avoid mess. Use non-toxic glue or a simple flour-and-water paste for young children. Supervise cutting, balloon inflation, and popping. Avoid inhaling dust when sanding; wear a lightweight mask if needed. Keep small decorations away from very young children to prevent choking. Allow plenty of drying time between layers to prevent mold and ensure a sturdy final sculpture.
Watch & Learn
Need help?
What can we use if white glue or newspaper are hard to find?
Use equal parts school glue and water or the flour-and-water paste from step 3, and substitute torn printer paper or scrap paper for the newspaper strips in step 4.
My paper maché is peeling or taking too long to harden — what should I fix?
Make sure you slide excess paste off each strip as in step 5, overlap three to four solid layers per step 7, and let the form dry on a warm, ventilated surface for the full 12–24 hours in step 8.
How can I adapt this project for younger children or older kids?
For younger children, pre-tear 1–2 inch strips, use a cardboard form taped together in step 2, and have an adult do cutting and popping from step 9, while older kids can build complex cardboard armatures, add extra layers in step 7, and paint detailed decorations in steps 11–13.
What are some ways to personalize or enhance our finished sculpture?
After trimming in step 10 and applying the base coat from step 11, personalize by adding painted details, stickers, glitter from step 13, or glue small battery LED lights inside the hollow shell after removing the balloon in step 9 and seal with clear varnish.