Make a dinosaur model
Build a simple dinosaur model using cardboard, clay, or recycled materials. Paint, assemble movable parts, and learn about dinosaur shapes and balance.

About this activity
Build a simple dinosaur model using cardboard, clay, or recycled materials. Paint, assemble movable parts, and learn about dinosaur shapes and balance.
What you need
Step by step
- 1
Step 1
Pick which dinosaur you want to make for your model like a T-rex or a long-neck.
- 2
Step 2
Use a pencil to draw simple shapes for the body head tail and legs on the cardboard.
- 3
Step 3
Cut out each cardboard shape carefully with scissors.
- 4
Step 4
Roll and shape clay pieces for the head feet and any thick parts you want to add.
- 5
Step 5
Glue the clay pieces onto the matching cardboard parts and let the glue hold them.
- 6
Step 6
Mark the spots on the body and on each limb where you want movable joints to be.
- 7
Step 7
Make small holes at each marked joint spot using the tip of a pencil or scissors with adult help.
- 8
Step 8
Join each limb to the body by pushing a paper fastener or toothpick through the holes and securing it so the parts can move.
- 9
Step 9
Press extra small clay pieces onto the body to add eyes spikes scales or other details.
- 10
Step 10
Paint your dinosaur with colours and patterns you like.
- 11
Step 11
Let the paint and clay dry completely in a safe place.
- 12
Step 12
Stand your dinosaur on a flat surface to see if it balances.
- 13
Step 13
If it tips over adjust the tail angle or spread the legs until it stands steady.
- 14
Step 14
Share a photo of your finished dinosaur model and tell what you learned about its shape and balance on DIY.org
Fun facts
How do I make a simple dinosaur model at home?
To make a simple dinosaur model, pick a reference or sketch. Build a core shape from cardboard tubes or air-dry clay: form body, head, tail and legs separately. Use brads, pipe cleaners, or toothpicks for movable joints; let clay dry or secure cardboard pieces with glue. Sand edges, then paint with acrylic or tempera. Test and adjust balance by trimming or adding weight to the tail so it stands.
What materials do I need to make a cardboard and clay dinosaur?
Gather cardboard (cereal boxes or corrugated sheets), air-dry or modeling clay, recycled bottles or tubes, scissors and a craft knife (adult use), PVA glue or hot glue, paper fasteners/brads, pipe cleaners, wooden skewers or toothpicks, acrylic or tempera paints and brushes, sandpaper, pencil, ruler, and optional googly eyes or stickers. Also have a protective mat, apron, and non-toxic sealant if you want to protect the paint.
What ages is this dinosaur model activity suitable for?
This activity fits ages 4β12 with adjustments: ages 4β5 enjoy squishing clay and gluing cardboard with close adult help; ages 6β8 can cut simple shapes, assemble joints, and paint with supervision; ages 9β12 can design movable mechanisms, refine balance, and use craft knives with adult permission. Always supervise cutting, small parts, and glue or paint use, and choose safer materials for younger children.
What are the benefits and safety tips for making dinosaur models?
Making dinosaur models builds fine motor skills, creativity, spatial reasoning, and understanding of shapes and balance. It encourages problem-solving when adjusting weight or joints and can introduce basic paleontology facts. Safety tips: use non-toxic materials, supervise scissors and hot glue, keep small parts away from toddlers, ventilate when painting, and let glue or paint fully dry. Test balance on a flat surface and encourage patience during drying stages.
Watch & Learn
Need help?
What can we use instead of modeling clay or paper fasteners if we don't have them?
Use crumpled aluminum foil or tightly rolled newspaper wrapped with masking tape as a substitute for clay and use a wrapped toothpick, sturdy brad, or a straightened paper clip as a movable joint instead of a paper fastener, then glue them onto the cardboard shapes.
My dinosaur's legs are floppy or fall offβwhat should I try?
If limbs are loose after pushing a paper fastener or toothpick through the holes, make the holes slightly smaller, wrap the toothpick with tape, add a dab of glue at the joint, or press extra clay around the hole when you join each limb to the body to tighten the connection.
How can I adapt this activity for different ages?
For younger children, have an adult pre-draw and pre-cut the cardboard shapes and supervise making holes and joining limbs, while older kids can draw more detailed dinosaur shapes, make pencil-tip holes themselves, experiment with wire armatures inside clay pieces, and paint finer patterns.
How can we make the model more realistic or interactive?
Enhance your dinosaur by pressing textured items like bubble wrap or small pasta shells into the clay for scales, adding an extra paper fastener for a movable jaw, painting detailed colors and patterns, and mounting the finished dinosaur on a painted cardboard base to test and adjust its balance.