Develop steady controls

Build a simple handheld controller from cardboard, elastic bands, and a pencil, then practice steady controls by guiding a marble along a narrow track.

Cardboard25 min9 materials
Get instructionsMore activities
Develop steady controls
Develop steady controls
25 minHands-on fun
13 steps →

About this activity

Build a simple handheld controller from cardboard, elastic bands, and a pencil, then practice steady controls by guiding a marble along a narrow track.

What you need

📦cardboard🧰elastic bands✏️pencil🧰marble✂️scissors🧴tape🖍️marker📏ruler🧰adult supervision required

Step by step

  1. 1

    Step 1

    Gather all the materials and put them on a clear table so everything is ready.

  2. 2

    Step 2

    Use the ruler and marker to draw a rectangle about the size of a small book on the cardboard.

  3. 3

    Step 3

    Cut out the rectangle from the cardboard using scissors with adult help.

  4. 4

    Step 4

    Attach the pencil along the center of the underside of the cardboard with tape so the pencil can roll freely like a pivot.

  5. 5

    Step 5

    Stretch one elastic band across the top of the cardboard and tape each end under the board to make a finger loop.

  6. 6

    Step 6

    Stretch a second elastic band a little above or below the first and tape its ends under the board to make a second finger loop.

  7. 7

    Step 7

    Use tape to make a narrow straight track on a flat table surface about as wide as the marble.

  8. 8

    Step 8

    Put the marble in the middle of your cardboard controller platform.

  9. 9

    Step 9

    Slip two fingers under the elastic bands so you are holding the controller steadily.

  10. 10

    Step 10

    Tilt the controller very gently to roll the marble off the platform and onto the start of the taped track.

  11. 11

    Step 11

    Guide the marble along the track by making only tiny tilts and slow wrist movements to practice steady control.

  12. 12

    Step 12

    Make the challenge harder by narrowing the tape track or making it longer and try guiding the marble again.

  13. 13

    Step 13

    Take a photo or video and share your finished controller and marble run on DIY.org.

Fun facts

🧠Hand–eye coordination gets stronger with practice — simple games like guiding a marble build control and timing in kids.
🎥Marble racing videos (like Jelle's Marble Runs) have drawn millions of views — marbles are more thrilling online than you might expect!
📦Cardboard is lightweight, easy to cut and fold, and recyclable, which is why makers love it for quick prototypes and toys.
🟢The rubber band was first patented in 1845, and its stretchy force is perfect for DIY mechanisms and simple controllers.
✏️A single pencil can draw a line tens of miles long (a commonly shared estimate is about 35 miles) — great for marking tracks and guides!
🧠Hand–eye coordination gets stronger with practice — simple games like guiding a marble build control and timing in kids.
🎥Marble racing videos (like Jelle's Marble Runs) have drawn millions of views — marbles are more thrilling online than you might expect!
📦Cardboard is lightweight, easy to cut and fold, and recyclable, which is why makers love it for quick prototypes and toys.
🟢The rubber band was first patented in 1845, and its stretchy force is perfect for DIY mechanisms and simple controllers.
✏️A single pencil can draw a line tens of miles long (a commonly shared estimate is about 35 miles) — great for marking tracks and guides!

How do I build a simple handheld controller and practice steady controls with a marble track?

Cut a sturdy cardboard rectangle (about 15×10 cm) and score a shallow channel for the marble. Make two small slits to hold a pencil horizontally under the platform. Stretch elastic bands over the top, looping under the pencil so it acts as a springy tilt axis. Place a narrow track on a table, set the marble at the start, then gently tilt the pencil to guide the marble along the track, practicing slow, controlled movements and pauses.

Go deeper

What materials do I need to make a cardboard, elastic band, and pencil controller?

You’ll need cardboard (cereal box or similar), a pencil or small wooden dowel, several elastic bands, scissors, tape or glue, a ruler, marker to draw the track, and a marble. Optional items: hot glue for stronger joints (adult use), a craft knife (adult use), a non-slip mat, and extra cardboard strips to raise track edges. Substitute a bead if you want a larger, less-roll-prone piece.

Go deeper

What ages is this steady-control marble activity suitable for?

Suitable for about ages 4–12 with adult supervision. Children 4–6 benefit from guided building and practice; 7–9 can assemble most parts themselves and focus on steady-hand control; 10–12 can design finer controllers and longer tracks. For younger kids, pre-cut cardboard and extra adult help are recommended. Never give marbles to children under 3 due to choking risk.

Go deeper

What safety tips should I follow when making and using the marble controller?

Keep marbles away from children under three and supervise closely. Secure elastic bands so they won’t snap or fly off—tie or tape ends and check for wear. Use blunt scissors with kids; adults should handle craft knives or hot glue. Work on a stable, non-slip surface and test the controller gently before play. Encourage slow, deliberate movements to avoid sudden jerks and minimize spills or falls.

Go deeper

Watch & Learn

Need help?

What can we use instead of a marble or elastic bands if we can't find them?

If you don't have a marble use a small round button, bead, or coin of similar size and for elastic bands use hair ties or strips of fabric taped under the cardboard to create finger loops, making sure the taped track still fits the substitute 'marble'.

My pencil pivot won't roll and the controller feels stiff—what should I try?

If the pencil pivot sticks, remove some tape, reposition the pencil exactly along the center underside of the cardboard, and slip a tiny folded piece of paper under the pencil as a spacer so it can roll freely.

How can I adapt this activity for a 3-year-old, a 7-year-old, or a 10-year-old?

For ages 3–4 have an adult cut the cardboard and use a wide taped track and a larger bead while supervising the finger loops, for ages 5–8 follow the original steps with guided help, and for ages 9–12 narrow or lengthen the taped track and add timing challenges to increase difficulty.

How can we make the controller and marble run more fun or challenging?

Decorate the cardboard with the marker, add ramps or turns with folded paper glued beside the taped track, create multiple parallel tracks or narrow the tape to increase difficulty, and take a photo or video to share on DIY.org.

Your first game is on us.

Describe a game below - no sign-up needed to try.

KidsGPT has moved to ChatDino — powered by AstroSafe

Make me

DIY.org

Kid-safe AI for discovery and learning. Ask anything, explore everything, learn with confidence.

Product

  • Pricing
  • App
  • All Apps

Resources

  • Blog
  • Kids Wikipedia
  • Worksheets
  • Activities for Kids
  • Build a Hacker Simulator
  • SafeTube

Company

  • About
  • Terms & Conditions
  • Privacy Policy
  • AstroSafe
TwitterInstagramYouTube

© 2026 DIY.org. All rights reserved. · Powered by AstroSafe